BMRX Rotary Level Indicators
The BRMX Rotary Level Indicator has a state-of-the-art design features and a cutting edge technology. It provides reliable point level detection and measurement of dry bulk solids in bins, tanks, silos, hoppers, and material conveyors. Different mounting options are available: on the top or side of a vessel. The BMRX are wired to an alarm or light panel, to alerts operators when bins are full or empty, a relay switch activates the alarm or the panel light indicator. It can be used in powders or solids with a bulk density from 2 to over 100 lb./cu. ft. The BMRX features “de-energized” operation of the motor which shuts the motor down when material is present, saving energy costs and prolonging the motor life.
- Highlights:
- Simple, Rugged, Reliable Operation
- Built for Long Life
- Technical Specifications:
- Rotary Ambient/Operating Temperature: -40°F to +185°F (-40°C to +85°C)
- Process Temperature: Up to +400°F (204°C)
- Approvals/Certification: CSA/US Class I, Groups C & D and Class II, Groups E, F & G and ATEX certifications
- Conduit Connection/Entry: 3/4” NPT
- Enclosure Material: Die cast aluminium, USDA approved powder coat finish.
- Enclosure Rating: NEMA 4X, 5, 9 &12
- Material Density: From 2 lb. to 100 lb./cu. ft.
- Mounting: 1-1/4” NPT
- Output: DPDT 10 Amp, 250 VAC
- Power: 24/115/230 VAC, 50/60 Hz; 12/24 VDC, 60/35 mA
- Pressure: 1/2 micron, 30 PSI
- Shaft: Stainless steel
BMRX-100 Rotary Level Indicators
What distinguishes the BMRX-100 Rotary Level Indicators is its reliability and simplicity of its mechanical design and operation. It detects the material level by continuously turning its paddle until it comes in contact with the material.
BMRX-300 Rotary Level Indicators
In addition to having the same capabilities if the BMRX-200, the all new BMRX-300 is equipped with a built-in large LED indicator. Depending on your setup, the large bright LED indicator switches colour …
BMRX-200 Rotary Level Indicators
It has the same capabilities if the BMRX-100 with more features. The simple switch in the BMRX-100 is replaced with a PCB in the BMRX-200 model, which mad it possible enhance the performance of the Rotary Level Indicator by …
Contact HMA Geotechnical to find the right solution for your project.