The Baker Hughes Panametrics M Series – Aluminium Oxide Moisture Sensor Probes from HMA INSTRUMENTATION are coupled to Panametrics hygrometer consoles by an interconnecting cable. Ease of use, a wide measurement range, and rigorous calibration standards make these systems the preferred choice for industrial moisture measurement worldwide.

The Baker Hughes Panametrics M Series – Aluminium Oxide Moisture Sensor Probes from HMA INSTRUMENTATION are designed to be located at the process, exactly where the measurement is needed. The cable length between the probe and hygrometer may be 610 m or more. The operating temperature range is –110°C to 70°C, the pressure range is from vacuum up to 345 bar, and no minimum flow rate is required. Sample cells make the M Series probes easy to install, while the cells are available in general-purpose, Type 4 weatherproof, and Type 7 explosion-proof housings.

Remote installation of the probe and wide operating parameters allow for on-site placement. As a sample need not be brought to the analyser, both the time lag and the potential for sample contamination associated with sample delivery systems are eliminated. This feature is extremely important in the measurement of very low moisture content, or where rapid changes occur.