Monthly Archives: October 2013

Home/2013/October

A Cross-Contamination Cost Saver

2018-05-14T04:15:39+00:00October 29th, 2013|

Cross-contamination from your storage vessel cannot only produce environmental issues downstream but money is literally being flushed away.  Incorrect timing for water drainage valves has been a costly exercise in many liquid/liquid applications. Using an Agar Corporation ID-200H Series Probe to provide a 4-20mA signal and alarms, HMA POGC has

Analysing Hydrocarbons can be a painstaking process

2017-11-27T03:52:25+00:00October 22nd, 2013|

The first step of hydrocarbon analysis is the extraction of a sample.  This sample has to be prepared and sent to a laboratory for analysis.  External, third party laboratory fees can be quite high and long waits can be expected for the results. Are you tired of waiting for the results? Easy, onsite, accurate sample

A Cure for Foam Carry-Over

2018-05-14T04:18:14+00:00October 15th, 2013|

Severe damage to gas compressors and upsets in downstream operations can be caused if foam carry-over from liquid/gas separators is not properly controlled.  Foaming can occur in multiple applications from production, refining and petrochemical process. Using an Agar Corporation ID-200H Series Probe to provide a 4-20mA signal and alarms, HMA POGC has helped to

TURBINATOR – The Next Generation in Foam Mixing Technology

2017-11-27T04:28:24+00:00October 8th, 2013|

The Knowsley SK Turbinator  is a positive  displacement  foam concentrate dosing machine which uses the firewater supply as a  power  source  but  which  produces  zero  waste  water. The Turbinator is designed to accurately mix foam concentrate liquid with either freshwater or seawater and is suitable for use in fixed systems or in mobile units

HMA POGC and Hobre instruments introduce a new spray drier safety and optimisation system

2017-11-28T23:48:09+00:00October 1st, 2013|

Hobre’s HiCOSYS H2O analyser and CO detection system uniquely provides  both a preventative system for early fire detection and a method to optimise efficiency through reliable moisture measurement in spray driers predominantly used in milk and coffee powder production. An innovative low pressure sampling system enables simultaneous measurement of H2O and CO without complex