As oil becomes heavier and more viscous, it is more and more difficult to get the oil to flow into the well bore where it can be pumped to the surface. This heavy Canadian oil is often referred to as bitumen and has an API gravity ranging from 8—14.
Many manufacturing processes produce hydrocarbon waste that contain varying amounts of water. Some of these industries are: Refining, Chemical Manufacturing, Steel, Metal Finishing, Pharmaceutical
A common problem in the Sour Water (SW) Stripper Unit is caused when hydrocarbon is discharged with the sour water from the Knock-out Drum into the Surge Tank which feeds the SW Stripper Column (see simplified process flow diagram). The hydrocarbons will vaporize with the sour gas being sent to the Sulfur Recovery Unit (SRU).
Refineries currently utilizing Agar systems increase throughput up to 20% and significantly reduce theamount of process upsets - resulting in up to an 80% reduction in hydrocarbon under carry to the waste water treatment plant as witnessed by the Environmental Protection Agency (EPA). Agar systems provide an unmatched ability to optimize difficult separation processes by utilizing concentration measurement and control.
The Agar System 2 provides automatic monitoring and indication of accumulated hydrocarbon in API skimmer systems. When used in conjunction with mechanical or pneumatic actuators, the system provides complete
automatic control of the oil recovery process.
Determining the production rate from oil wells is simpler and less costly because of AGAR’s advanced technologies. For many years complex 3-phase separators were the industry standard because measurement technologies required the separation of the hydrocarbon, water, and gas phases.
Contamination of amine systems (Refer to Figure 1 on following page) results in operational and environmental challenges for the operator. Contaminants include: Particles such as iron sulfide with the feed, Heat stable salts, Surface active agents, Liquid hydrocarbon in the gas feed, Carboxylic acids formed from oxygen entering the amine system, Corrosion inhibitors and water treatment chemicals entering with makeup water and wash water
Produced oil contains water in highly variable amounts. Heater-treaters heat the produced fluid to break oil/water emulsions and to reduce the oil viscosity. The water is then typically removed by utilizing gravity to allow the free water to separate from the oil.
In 2012 a large refinery in New South Wales came to a realisation – it needed to convert to a fuel tank farm and subsequently reduce staffing levels. Such a significant change would inevitably lead to the challenge of upgrading its fire protection and detection systems, to allow the site to become more automated and responsive in emergency situations...
HMA Instrumentation recently offered the Holiday Inn Rotarua a free of charge trial of the Fireye NXM2G Intelligent Boiler Load Controller. The NXM2G measures the supply and return temperatures of a hot water boiler systems via digital sensors and monitors the “call for heat”...