AGAR ID-200H Interface Detection
More Information
Foam Detection Application Note
INS-DS-0093 Agar Overview
INS-CS-0015 Interface & In Line Measurements
INS-CS-0016 Gas Sweetening
INS-CS-0017 Refining Applications Hydrotreating
INS-CS-0018 Dewatering of Storage Tanks
INS-CS-0019 Caustic Wash Systems
INS-CS-0020 Desalter interface control
INS-CS-0021 Foam Detection
INS-CS-0022 Water Knock Out Controls for Treaters & Separators
INS-CS-0023 High Temperature Heavy Oil Steam Flood Applications
INS-CS-0024 Advantages of OilWater Separation
INS-CS-0025 Waste Hydrocarbon & Slop Oil Tank Systems
INS-CS-0026 Sour Water Stripper Applications
INS-CS-0027 Increasing Throughput By Optimizing Separation Control
INS-CS-0028 API Separator Interface Control System
INS-CS-0031 Contaminant Detection in Lubrication Systems
Australia Tel: +61 (0)2 9428 7300
Indonesia Tel: +62 21 3040 4422
New Zealand Tel: +64 (0)7 850 2610
South Africa Tel: +27 (0)10 900 2055
Description
The ID-200H Series Interface Detectors from HMA INSTRUMENTATION are two wire 4 to 20 mA loop-powered probes used for interface measurement and control in all types of liquid/liquid and vapor/liquid separation processes, including emulsions and foam. Emulsion concentration is 0 to 100% hydrocarbon/water by water. The process temperature is 0°C to 149°C, the ambient temperature is -4°C to 85°C, while the pressure rating is up to 3 000 PSI. The probe is made from 316 grade stainless steel, Teflon, and Peek, with duplex, Hastelloy, and Monel available as options. The seals are Aflas and Teflon, with Viton as an option. The ID-200H Series Interface Detectors from HMA INSTRUMENTATION is NACE compliant.
